The only exceptions are the Classified Ads Exchange, Machinery Exchange, Lumber Exchange, and Job Opportunities and Services Exchange. A valid email return address must be included with each message.Responses should relate to the original question. Messages should be kept reasonably short and on topic, relating to the focus of the forum.Hobbyist and homeowner woodworking questions are inappropriate. WOODWEB is a professional industrial woodworking site.If these things are possible and I'm just not seeing it I'd gladly pay for your time and assistanceįORUM GUIDELINES: Please review the guidelines below before posting at WOODWEB's Interactive Message Boards ( return to top) Im wondering if anyone has any experience with Camworks and a 5 or even a 3/4 axis Homag and any advice. This is not a suitable way - The pucker factor is HUGE! (Though I haven't spent a ton of time with tech support which is what I'll be doing this week)įurthermore I have yet to find a proper way to add clamps or pods to the code to be fed into woodwop. Uniquely shaped parts are of concern to me.Īdditionally this is a 5 axis machine, I haven't been able to figure a safe way to define our saw other than as a 175mm radius router bit with a 3mm width of cut and approaching from the side and using great care with leadin leadout. Example, not being able to see a perimeter cut - so an ellipse would require me to guess where a safe area to setup pods or clamps. But I'm having trouble getting it to function to the level I'm used to with Alphacam. Camworks on the whole seems like a pretty powerful program, with lots of great features. The only thing I'm seeing is the stock material. So nothing, not even a perimeter cut is visible inside of woodwop. I Recently made a job switch to a company that has purchased Camworks.Ĭamworks have provided a post which as I've seen only puts out a Frier NC macro. I've been using Alphacam for the past 4 years running SCM and Homag machines.
0 kommentar(er)
